Forest Garden 4Life 7ft x 5ft Windowless Double Door Reverse Apex Pressure Treated Overlap Shed

The Forest Garden 4Life 7x5 Reverse Apex Wooden Shed (4LR57DDNWMHDBUN) is a 7ft x 5ft (2.28m x 1.53m) double door overlap shed with a reverse apex roof. It is windowless by design and built from FSC certified UK timber. This is Forest Garden's best overlap shed range.

The walls use 7mm straight-cut overlap cladding for effective rainwater runoff. Pressure treatment forces preservative deep into the timber grain the wood never needs retreating. That 25-year anti-rot guarantee is the longest on the market. Framing is 28mm x 28mm with 30% more framing than standard sheds. The 8mm OSB roof is covered in green mineral felt and reinforced with a metal truss bracket.

Double doors with double-Z framing resist warping and dropping. Hidden security hinges cannot be tampered with from outside. The hasp and staple locking plate is padlock-ready. The windowless design stops anyone seeing what is stored inside. The 12mm solid pressure-treated timber floor with bearers is far stronger than standard OSB shed floors.

A 25-year anti-rot guarantee with zero maintenance needed makes this outstanding value. More framing, a stronger floor and a free Yale combination padlock set it apart from basic overlap sheds.

The frame uses 28mm x 28mm timber sections with 30% more framing than standard sheds. Walls are clad in 7mm straight-cut overlap boards that allow natural timber movement and shed rainwater effectively. The 8mm OSB roof is reinforced with a metal truss bracket and covered in green mineral felt. The 12mm solid timber floor sits on pressure-treated bearers to lift it clear of ground moisture. Double doors use double-Z bracing to resist dropping and warping. All timber is pressure treated under vacuum and hydraulic pressure for lifetime rot resistance.

FSC certified UK timber throughout. Walls use 7mm straight-cut overlap cladding. Framing is 28mm x 28mm pressure-treated timber. The floor is 12mm pressure-treated solid timber board on pressure-treated bearers. The roof is 8mm OSB covered with green mineral felt. All timber is pressure treated under vacuum for deep preservative penetration.

A solid level base such as concrete or paving is needed before installation. The 12mm pressure-treated solid timber floor and bearers are included as standard no separate floor purchase is needed. If you do not have a suitable base you can add a wooden or plastic shed base kit at extra cost. You must prepare the ground yourself before delivery.

This shed arrives flat-packed in fully modular sections. The interchangeable panels are smaller than standard shed panels making them easier to handle. Two people are strongly recommended. Clear assembly instructions and a full set of fixings are included. A professional installation service is available at extra cost and is typically arranged within 2 to 3 weeks of delivery. If you opt for installation Forest will contact you after checkout to arrange a date.

The internal floor area is approximately 2.12m deep by 1.47m wide. A lawnmower fits easily. A wheelbarrow will fit. A single upright bicycle fits but two side by side would be very tight. A small workbench such as the Forest 3ft 11in workbench sold as an accessory fits along one wall. Wall-mounted shelving can be added to both side walls. The 12mm solid floor handles heavier items without flexing.