Yardmaster 10ft x 4ft Metal Pent Shed (2.98m x 1.19m)

The 104PZBUN is a 10ft x 4ft (2.98m x 1.19m) Yardmaster metal pent shed built entirely from hot-dipped galvanised steel with a metallic silver resin finish. It has a clean pent roof profile and an eaves height of 1600mm with a ridge height of 1740mm enough headroom to stand and work comfortably inside.

Yardmaster uses a 7-layer protection system including a primer coat, finish coat, two oxide layers and a wash reverse coat. The result is a shed that is completely maintenance-free no painting, no treatment, no roof felt to replace. It is weather-resistant, blister-proof, crack-proof and insect-proof. Stainless steel rust-free screws and an anchor kit are included.

Access is through internally mounted overlapping sliding double doors (1200mm wide x 1550mm tall) with padlockable handles fitted with anti-tamper bolts. No padlock is supplied. The shed has no windows which keeps stored items out of sight. A compact lawnmower, garden tools or folding furniture will fit inside.

A 10-year anti-rust guarantee backs every unit. Made in the UK. Assembly takes 3 - 6 hours with two people. An optional floor support kit and 3-tier steel shelf unit are available separately.

The 104PZBUN is built from hot-dipped galvanised steel panels finished with Yardmaster's 7-layer system primer coat, finish coat, two oxide layers and a wash reverse coat topped with a baked-on metallic silver resin. The pent roof uses a 150mm wide ridge cover that allows airflow while blocking rain. Ventilation runs along both the ridge and eaves to reduce condensation. Doors are internally mounted and overlap to shed water. Stainless steel screws and an anchor kit fix the structure to a concrete or paved base.

Hot-dipped galvanised steel throughout with a 7-layer protective coating including primer, oxide layers and a baked-on metallic silver resin finish. Fixings are stainless steel rust-free screws. An anchor kit in galvanised steel is included. No timber is used in the main structure. Made in the UK.

No floor is included with this shed. It must be built on a level concrete or paved base. You fix it down using the included anchor kit. An optional galvanised steel floor support frame is available to buy separately but does not include timber flooring. You need to prepare the ground yourself before assembly.

This shed arrives flat-packed for DIY assembly. Yardmaster recommends two people and estimates the job takes 3 - 6 hours. All parts are clearly numbered and an illustrated assembly manual is included. Stainless steel rust-free screws and an anchor kit are supplied. UK-based telephone support is available if needed. A professional installation service is also available at extra cost.

The base footprint is 2840mm wide by 1040mm deep. That is enough room for a compact lawnmower, a set of long-handled garden tools and folding garden chairs. A wheelbarrow could fit if stored lengthways. Two bikes would be a tight squeeze. The optional 3-tier steel shelf unit fits to the wall and is best installed during assembly. Wall hooks for tools are possible along the longer 2840mm side.