Yardmaster Emerald 8ft x 4ft Pent Metal Shed (2.38m x 1.19m)

The 84GPZBUN is the 8ft x 4ft Yardmaster Emerald Pent Metal Shed (2.38m x 1.19m). It has a pent roof profile and an emerald green finish. Made in the UK it sits at a practical size for most garden plots and delivers a clean modern look with smooth steel panels and a low-profile roofline.

The shed is built from high-tensile hot-dipped galvanised steel with 0.3mm cladding and seven protective layers including a primer coat, finish coat, two oxide layers and a wash reverse coat. There is no painting or rustproofing needed. Ever. The ribbed wall and roof panels have folded edges for safety and the structure is held together with stainless steel rust-free screws.

Sliding double doors span 1000mm wide and 1550mm tall with integrated weather seals and anti-tamper bolt handles. A padlock can be added though one is not included. The shed is windowless so contents stay private. A strong entry ramp is included for moving bikes or equipment in and out. Full ventilation runs along the top of the walls with a 150mm ridge cover to stop rain getting in.

A free anchor kit is included and the shed carries a 15-year anti-rust manufacturer guarantee. No floor is supplied so a level concrete or paved base is required.

The shed uses 0.3mm hot-dipped galvanised steel panels with a ribbed profile for rigidity. Wall and roof panels have folded edges to remove sharp cuts. Seven protective layers cover the steel including a primer coat, finish coat, two oxide layers and a wash reverse coat. The pent roof sits at ridge height of 1740mm with eaves at 1600mm. Doors are internally mounted and overlap to shed rain. Ventilation runs along the top of all walls and a 150mm ridge cover allows airflow without letting rain in. Stainless steel screws are used throughout.

The shed is made in the UK from high-tensile hot-dipped galvanised steel with 0.3mm cladding. Panels are ribbed for strength with folded edges. Seven protective layers cover the steel. Stainless steel rust-free screws are used for all fixings. No timber is used in the main structure.

No floor is included. The shed must sit on a level concrete slab or paved area. You need to prepare and lay this yourself before assembly. A free anchor kit is supplied to bolt the shed down to the base. An optional galvanised steel floor support frame is available separately if you want a raised internal floor.

This shed arrives flat packed for DIY assembly. Yardmaster provides a clearly illustrated manual and stainless steel rust-free screws are included. Assembly takes approximately 3 to 6 hours. Two people are recommended. Yardmaster also offers local helplines if you need extra support during the build. Installation services are available if you prefer not to self-assemble.

The internal base measures 2240mm wide by 1040mm deep. That is enough room for a lawnmower, a set of garden tools and some smaller equipment. A workbench could fit along the 2240mm wall. The entry ramp makes it easy to wheel in a bike or a wheelbarrow though the 1040mm depth means only one bike fits comfortably front to back. Wall hooks or a shelf unit can be added. An optional 3-tier integral steel shelf unit is available separately for small tools.