Yardmaster TopLight 8ft x 5ft Pent Metal Shed (2.38m x 1.59m)

The 85SP18BUN is the 8' x 5' Yardmaster TopLight Pent Metal Shed (2.38m x 1.59m). It has a modern pent roof and is finished in a resin-coated anthracite-grey. Built from hot-dipped galvanised steel and made in the UK it is rodent proof and resistant to blistering. The eaves sit at 1.8m with a ridge height of 2.1m.

The steel construction is hot-dipped galvanised throughout. Completely maintenance free no painting or treating required ever. The resin-coated anthracite-grey finish resists rust and is backed by a 15-year anti-rust guarantee. All fixings are rust-proof too.

Sliding double doors are 1.02m wide and 1.78m tall. They overlap for a weatherproof seal and are fitted with anti-tamper bolts plus a padlock fixing padlock not included. Translucent shatterproof Perspex upper strips let natural light in. Ventilation runs along the top of the walls. No windows means no direct sightlines to stored contents. A lawnmower, garden tools and shelving all fit comfortably.

A free anchor kit is included. No floor is supplied so it must be fixed to a level concrete or paved base. Assembly takes 4 - 6 hours with clearly numbered parts and an assembly manual included.

The frame and cladding panels are hot-dipped galvanised steel a process where steel is coated in zinc to prevent rust from the inside out. A resin-coated anthracite-grey finish adds a second layer of protection. The pent roof slopes from a 2.1m ridge down to 1.8m eaves and is covered in steel. Sliding double doors hang on a track system and overlap to seal against weather. Anti-tamper bolts add door rigidity. Ventilation slots at the top of the walls allow airflow. All fixings are rust-proof. The structure anchors to a concrete or paved base via the included anchor kit.

Hot-dipped galvanised steel throughout panels, roof and fixings. The finish is a resin-coated anthracite-grey. Translucent upper strips are shatterproof Perspex. All fixings are rust-proof. Made in the UK. No timber is used in the construction.

No floor is included with this shed. It must be fixed to a level concrete or paved base. A free anchor kit is supplied to secure it. You will need to prepare and lay the base yourself before assembly. The base should match the shed's footprint of 2.26m x 1.46m at minimum.

The shed arrives flat packed for DIY assembly. Assembly takes an estimated 4 - 6 hours and two people are recommended. All rust-proof fixings, clearly numbered parts and a full assembly manual are included. UK-based telephone support is available if needed. Professional installation is also available as an option through the merchant.

The base footprint is 2.26m wide by 1.46m deep roughly the size of a large parking space section. A standard lawnmower fits easily alongside garden hand tools. A wheelbarrow will fit but leaves limited floor space. The 1.8m eaves height means wall hooks and shelving are practical on all sides. A Yardmaster 5-Tier Metal Shelving Unit fits well inside. Bikes can be stored but will take up most of the floor area. Best suited to one main item plus organised tool storage on the walls.