Forest Garden 6'5 x 2'10 Overlap Double Door Wooden Bike Shed - Pressure Treated No Floor

The Forest Garden 6'5 x 2'10 overlap wooden bike shed (OPPLOSNFLHD) is a pent roof timber store built specifically for bikes, mowers and garden tools. It measures 1828mm wide x 750mm deep at the base with a ridge height of 1455mm. The 2000-litre capacity makes it a practical fit for two bikes or a mower plus tools. Made in the UK from FSC®-certified timber.

The shed uses 7mm overlapping timber boards on a 28x28mm frame. Pressure treatment is applied at the factory so no further treatment is needed that saves time and money over the life of the shed. The 8mm OSB roof is covered with green sand felt for weather protection. The 15-year anti-rot guarantee backs up the build quality.

Wide double doors measure 760mm across and fasten with a hasp and staple so you can add your own padlock (not included). Hidden door hinges add an extra layer of security. There are no windows so contents stay out of sight. The shed has no floor by design wet bikes drain away without damaging the timber.

The pressure treatment and 15-year anti-rot guarantee set this apart from basic dip-treated sheds. Free UK delivery and FSC-certified timber make this a solid buy for secure bike and mower storage.

The frame uses 28x28mm timber sections joined with supplied fixings. The 7mm overlap cladding boards are laid horizontally with each board overlapping the one below to shed rainwater. The pent roof sits on the frame at a single pitch and is built from 8mm OSB board covered with green sand felt to keep water out. Pressure treatment forces preservative deep into the timber fibres rather than just coating the surface. This is why no retreatment is needed and why Forest back it with a 15-year anti-rot guarantee. There are no windows which keeps the structure rigid and the contents private.

FSC-certified softwood timber throughout. Cladding is 7mm overlap boards. The frame section is 28x28mm treated timber. The roof is 8mm OSB (Oriented Strand Board) covered with green sand felt. All timber is pressure treated at the factory. Manufactured in the UK.

No floor is included with OPPLOSNFLHD by design the open base lets water drain from wet bikes. Place the shed on a firm level surface such as a concrete slab or compacted paving. You must prepare the ground yourself before delivery. A with-floor variant is available separately if you prefer a solid base.

This shed arrives flat packed for DIY assembly. Forest describe it as easy to assemble and supply both instructions and fixings in the box. Two people are strongly recommended especially for lifting the roof panel. No assembly time is stated by the manufacturer. Professional installation is available as an add-on service if you prefer not to self-build.

The 1828mm wide x 750mm deep footprint and 2000-litre capacity will take two adult bikes stored side by side. A lawnmower fits with space left for hand tools along one wall. The 1455mm ridge height is enough to stand a bike upright. A full-size wheelbarrow alongside bikes is a tight fit. Wall hooks or a shelf unit along the back panel would make the most of the depth. This is a dedicated bike and mower store rather than a general garden shed.